Showing 1–16 of 195 results
1.45 oz./sq. yd. Lightweight Industrial Cloth used in Osprey and other designs. Widely used by model builders, known as “Deck Cloth” , Thread Count 60 x 47. (50″ Width)
Lightweight Industrial Cloth with aerospace applications. Excellent for model building. Only .004″ thick. Crowfootweave, which contours nicely. Thread Count 60 x 58. Breaking Strength 125 x 120 lb./in. Finished Weight 3.08 oz./sq. yd.
3.74 oz./sq. yd. Light weight Boat or Tooling Cloth. Tight plain weave. Thread Count 24 x 22. Breaking Strength. 160 x 135 lb./in. Finished Weight 3.60 oz./sq. yd.Thickness – .0055″,50″ width.
5.79 oz./sq. yd. Lightweight Boat Cloth. Flat weave, not twisted. Thread Count 18 x 18. Breaking Strength 250 x 225 lb./in. Finished Weight 5.85 oz./sq. yd. Thickness .010″., 60″ width.
The chemical formulation of S-glass differs from that of standard E-glass. Examples of E-glass are found in the Standard Fiberglass Cloth section of this catalog. S-glass is 30% stronger and 15% stiffer than E-glass and retains these properties up to 1500 F. S-glass is also considerably tougher than an equivalent E-glass. Other styles are available…
VACUUM BAGGING FILM – #7400 vacuum bagging film is a high grade nylon 6 film. It is transparent green in color and heat stabilized for long term, 350 F cures. This film is soft and pliable and ideal for high temperature composites, metalbond, and any function requiringheat and pressure. Sold per yard. 60″ Width material…
9.66 oz./sq. yd. Heavy Weight Boat or Tooling Cloth. Plain Weave. Thread Count 16 x 14. Breaking Strength 450 x 410 lb./in. Finished Weight 9.40 oz./sq. yd. Thickness .014″.60″ wide.
8.5 oz./sq. yd. Lightweight boat or tooling cloth. Threads per inch: 18L x 18W. Used in Osprey aircraft and other homebuilts. (50″ width)
5.85 oz./sq. yd. Lightweight Boat or Tooling Cloth. Plain Weave. Thread Count 18 x 18. Breaking Strength 250 x 250 lb./in. Finished Weight 5.64 oz./sq. yd. Thickness .009″ as used on KR Aircraft. (60″ Width)
8.95 oz/yd Medium WeightStandard Industrial Cloth. 8 Harness Satin. Thread Count 57 x 54. BreakingStrength 350 x 330 lb./in. Finished Weight 8.95 oz./yd Thickness .009 mils. Sold by the yard.
Before doing any sort of plastic repair, use Super Clean Plastic Cleaner to maximize the durability of your repair. Super Clean removes mold release agents, wax, grease, silicone, tar, bugs, sealers and other contaminants from painted or unpainted plastic or metal surfaces. It’s simple to use, just spray it on and wipe it off with…
2OZ. NYLON RELEASE PLY – #5201 SRBis a smooth nylon fabric which has been scoured and heat setso that it is contaminate free and will not shrink during thelaminate cure cycle. It is then coated with a special releaseblend. The peel ply may be used for composite manufacturing andmetal bonding, but is not recommended for…
SMC Hard-Set Filler is a two-part epoxy system that is very rigid when fully cured. It works on ABS, SMC, fiberglass, polycarbonate and on any other repair application that requires a rigid, high impact resistant repair material. It has a working time of 3 to 4 minutes and is ready to sand in 15 minutes….
Uni-Cloth is a quality fiberglass cloth, that is well suited for reinforcing plastic repairs as well as any other application requiring fiberglass reinforcement. 9 sq. ft. (3ft. x 3ft.)
Reinforcing Wire Mesh is designed to be used to reinforce any repair made with an airless plastic welder. We recommend that the mesh be used to when a tear goes to the edge of the plastic. Since it is stainless steel it is 5 times stronger than aluminum wire screen and is virtually impervious to…
This quick spray Activator causes instant curing of all Insta-Weld adhesives and other cyanoacrylate adhesives. The activator may be used before or after the adhesive is applied. This 2 fl. oz. (59 ml) plastic bottle comes with a sprayer.
No products in the cart.