Use as a retainer for riveting baffle seals to baffles. Features: Corrosion resistant Clamps better than washers or light gauge sheet metal Economical

This is screw kit specifically for the Cessna 150/152 seat rails. This #10 Structural Screw Kit contains all screws and nuts required to install four seat rails.Kit Contains: 40 MS27039-1-08 Screw 10-32 x .5312 MS27039-1-09 Screw 10-32 x .5942MS27039-1-17 Screw 10-32 x 1.094 40 MS21044N3 Nut, Nylon Lock

High Pitch 10-28 Pitch Range Props (For use on +60HP engines with Type C Gear boxes). Adjust the pitch on the ground in a matter of seconds by turning the screw adjuster in the center of the prop. The pitch change range is from 10 to28 degrees on the tips . The supercams are installed…

This 2″ Scat Tube Inlet is fabricated from 6061 Aluminum with pre-drilled 3/32 rivet holes, ready to rivet to baffling.

The VC-150 is a tadpole tape that is silicone coated for added protection. It has a solid 3/4″ bulb with a 1 1/4″ flap x 10Ft

Plastic in-line fuel with 3/8″ inlet & outlet – metal version is 33033 with hoses and camps Style: Fuel Filter Height: 3.543 Outer Diameter: 1.826 Nominal Micron Rating: 30

Latch and Pinned Post

Designed for damping resonant vibrations of thin sheet metal, these panels are pressure sensitive, specially compounded polyurethane damping foam with an aluminum foil backing. The adhesive on the foam is protected by a peel-off paper covering. It is an excellent insulator for conducted heat and is an excellent heat reflector. Fireresistant and self-extinguishing per FAA…